| Product Type: | 20C Cold Water Soluble PVA Film for Embroidery |
| Material: | 100% PVA(Polyvinyl alcohol) Fiber |
| Technics: | Blowing, Casting |
| Color: | Transparent |
| Feature: | Eco-Friendly, Water Soluble, Other |
| Thickness: | 25um-40um |
| Width: | Normally 160cm(63inch) or 100cm(39.4inch) |
| Water Temperature: | 20°C |
PVA water soluble film
By using water-soluble PVA film as the proximal cloth, time can be
saved more than by using a paper. Water-soluble PVA film increases
dimensional stability, you can make more beautiful embroidery.
Water-soluble PVA film can be solved by cold water, so you can wash
away the film without damaging the clothes.
Water-soluble PVA film used in embroidery has advantages over other
films. It is non-toxic and can be dissolved totally , it doesn't
result in producing wire-drawing, nodal point, wire-break, offset
direction etc. It is fit for multi-head embroidery machine. It
takes place of non-woven fabrics as it can avoid textile's
deformation and fading in high temperature.
The advantage and characteristics:
- Our factory offers water soluble film (PVA – PVOH) crafted for the
specific needs of the embroidery sector.
- These water soluble films for textiles embroidery act as a fabric
stabilizer during the embroidery process.
- Our factory offers a variety of film types, gauges and sizes to
allow for different embroidery techniques.
- Water soluble films for embroidery can be used without fabric and
simply washes away, leaving only intricate design.
- Water Soluble film for embroidery can be either dissolved in cold
water or can be torn away from the fabric at the end.
- Not only is the utility cost reduced but better-quality embroidery
is achieved at the same time.
Usage Attention:
1. Please use PE bag pack the remaining cold water soluble film
when not work, and keep in dry place to prevent be affected with
damp;
2. Pay attention to the influence of environmental humidity on the
cold water soluble film, recommended to install air-conditioner in
workshop;
3. The temperature should keep between 15℃ to 30℃, try to use the
flowing water, flowing faster, dissolved more thoroughly;
4. After embroidered, you’d better wash three times, soaking for
the first time more than 30 minutes advisable, clean with clear
water for the last time, avoid hardening cloth;
5. Cold water soluble film resisted to mineral oil and organic
solvents, but keep away from the strong acid and alkali, chlorine
free radicals, and other material maybe cause chemical reaction
with PVA.
