Water-soluble film has been widely used in water-soluble chemical
products and inner packing material used under the water in Europe,
Japan and other countries. For example: pesticide, fertilizer,
cleanse, water treatment agent, mineral addictive, concrete
addictive, chemical reagent for photograph and gardening. And also
as the inner package of seeds sheet, dress, food and hospital
laundry, the specialties of the products are as bellow:
1) It's the best weapon to protect the top quality products,
prolong the using time of the products.
2) Environmental friendly, can be 100% dissolved, nothing toxic
produced except the CO2 and the H20.
3) Safe, convenient, can prevent the people from contacting with
hand.
4) Can be weighted exactly, no waste.
5) Super tensile and split resistant, can be adhered and
heat-sealed.
Property of the products
1) Water ratio
the water-soluble film must be packed in PE plastic to make the
water unchanged, when out of the PE plastic, the water ratio will
change with the temperature, and the property will also be changed.
2) Antistatic
Different from the other plastic film, the water-soluble film has
good antistatic property. When used in packing, the plasticity will
not be influenced because of static electricity, and no dust can
cling to the film.
3) Water and air transmissibility
The water-soluble film has strong transmissibility e to water and
ammonia, but can block the oxygen, nitrogen, hydrogen and co2.
4) Sealability and agglutination
The water-soluble film has great sealability, can be used to heat
seal of resistance and high frequency.
5) High intensity and tensile resistance. It's better than any
other films in split resistance.
6) Printable
Various patterns can be printed on the film clearly be normal
methods.
7) Oil and organic resistance
The water-soluble film has good capability of resisting oil,
mineral oil, almost all fat and organic solvent. Keep the
water-soluble film away from strong alkali, acid, chlorine free
radical and other substances that react to PVA
8) Water-solubility
The dissolution speed of the water-soluble film depends on the
thickness and the temperature.
Specification (can process according to your special need)
Thickness(μm): 30μm-80μm
Length: more than 500/roll
Width: optional between 200MM-1000MM
The film gains the advantage over others in transparency and
glossiness. This makes the packed objects brighter and has sense of
value.
Remarks
1. If the water ratio exceed 5‰, water-soluble film can not be
used.
2. If the package has been opened, please encased in PE film.
3. Preservation condition of the water-soluble film: 20～25℃;
55～70%RH;
4. During the usage, whatever problems you meet about the quality
and technique of the products, PLS contact the supplier.
